MUTOH ValueJet VJ1324X User Manual

VJ-1324X OPERATION MANUAL Panel setup menu
5.1 Setup menu 171
5.1.16.1 SmartChip menu
NOTE
• To display the various information of Smart chips, use genuine ink and S/C cards.
If ink other than genuine ink is used, the ink status will not be displayed correctly.
5.1.17 Roll Length menu
Sets up the roll media length.
Setup item Setting Description
KCMY 0 to 100 (unit: %) The amount of ink remaining in each ink cartridge of K/C/M/
Y is displayed.
• If it is blinking at 10%, smartchip recovery is being
performed on the corresponding ink cartridge.
7.4 Smartchip Recovery
—
• [Cancel] key: shifts to the previous menu.
5.1 Setup menu
Setup item Setting Description
Roll media <Off> Roll Length is not used.
• [Enter] key: saves the setting and shifts to the previous
menu.
5.1 Setup menu
Roll1 Sets up the roll media length.
The set values of the roll media length can be set as “Roll1” to
“Roll3”.
• [Enter] key: saves the setting and shifts to the sub menu.
5.1.17 Roll Length menu
Roll2
Roll3
—
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu

MUTOH ValueJet VJ1324X Specifications

General

Brand	MUTOH
Model	ValueJet VJ1324X
Category	Printer
Language	English