MUTOH ValueJet VJ1324X - 5.1.2.1 Spitting Pass count menu

VJ-1324X OPERATION MANUAL Panel setup menu
5.1 Setup menu 153
5.1.2.1 Spitting Pass count menu
Set the frequency (spitting return count) that the print head returns to the spitting box (located) on the
origin side when setting “On” or “On Media” in the Spitting menu.
NOTE
• If you set the flushing return count to a high number, the nozzle will become easily clogged when
printing for a long time because flushing is not performed over the flushing box.
Setup item Setting Description
ReturnCount <1 time> to 999 times Set the spitting return count.
—
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.2 Spitting menu