MUTOH ValueJet VJ1324X - 5.1.1.1.5 Pre-heater menu

Panel setup menu VJ-1324X OPERATION MANUAL
146 5.1 Setup menu
(5) Micro Adj.Change menu
Sets up Micro Adjustment Change.
5.1.1.1.5 Pre-heater menu
Sets the temperature of the pre-heater.
Set to curb a rapid temperature change at the printing portion by pre-heating the media before printing.
NOTE
• The set temperature of the pre-heater differs depending on the media.
Setup item Setting Description
Micro Adj.Change -5.00% to <0.00> to 5.00% Sets up Micro Adjustment Change.
—
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Pre heater Off / <30 °C> to 50 °C Sets the temperature of the pre-heater.
1.Roll media
2.Pre heater
3.Print head
—
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type menu
23
1