VJ-1324X OPERATION MANUAL Troubleshooting
7.2 Error messages 241
7.2 Error messages
This section describes messages displayed during normal printer operation or when errors occur, and
solutions to the messages.
7.2.1 Status messages
When the product is operating correctly, each operation status is displayed on the operation panel as
below.
No. Display Description Reference
1 Ready to Print Standby (Media is loaded). —
2 Media End Standby (Media is not loaded). —
3 Receiving Receiving data. —
4 Analyzing data Analyzing data. —
5 Printing Under printing. —
6 PrintRestart – > ENTER Pausing printing.
Press the [Enter] key.
—
7 Warming Up Warming up the heater. —
8 Warming Up
Skip – > ENTER
Received the print data while the heater is
being heated.
To start printing before the heater is warmed
up, press the [Enter] key. Reference
4.4.7 Start
Printing during
Warm up
9 Cleaning **% Cleaning the head.
Please wait a while.
6.2.3 Head
cleaning
10 Ink Refill **% Charging the ink.
Please wait a while.
3.3 Installing
ink cartridges
11 During Washing Washing the print head by the head washing
operation.
Please wait a while.
3.3 Installing
ink cartridges
12 Moving Origin Pos. The print head is moving to the original
printing position in the Origin menu.
Please wait a while.
5.1.8 Origin
menu
13 Confirm Position – >E The print head is moving to the original
printing position in the Origin menu.
Press the [Enter] key.
5.1.8 Origin
menu
14 Head Cleaning Cleaning Head.
Wait for a moment.
5.1.18
Longstore menu
15 Remove Cartridges Performs head cleaning.
Remove cartridges.
5.1.18
Longstore menu
16 ** Initialing ** Initializing the setting in the Initialization
menu.
Please wait a while.
5.1.20
Initialization menu
To Next Page
Loading...
Need help?
General