Panel setup menu VJ-1324X OPERATION MANUAL
164 5.1 Setup menu
5.1.11 Head Travel menu
Sets up the range that the print head moves while printing.
• The minimum travel range of the printer’s CR is 500mm.
• Note that even when the media with a width that is below 500mm is loaded while the printer is set
to “Data” or “Media Width”, the actual CR travel range does not go below 500mm.
5.1.12 Multi Strike menu
Sets up the overwrite count per line.
Setup item Setting Description
Distance <Data> The print head moves the range of the print data width.
The printing speed will be improved since the moving range
of the print head is optimized.
Machine The print head moves from origin to the maximum printable
media width.
<Media Width> The print head moves the range of the media width.
—
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
Setup item Setting Description
Multi Strike <1 time> to 9 times Set the overwrite count.
—
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
To Next Page
Loading...
Need help?
General