Panel setup menu VJ-1324X OPERATION MANUAL
178 5.1 Setup menu
5.1.25 Header Dump menu
This function is to specify whether to print the following information (dump data) of print data.
• Data header
• Data dot number (printed only when Header damp setting is “On”)
• Printing date and time
• Printer serial number
• Firmware version
• Receiving time (printed only when Header damp setting is “Dump”)
• Receiving size (printed only when Header damp setting is “Dump”)
• The dump data will be used as a reference material to receive technical supports.
When a print is executed in connection with computer, the setting of RIP software will be printed in the “Data Header”.
Setup Item Set Value Description
Header Dump <Off>
• Only a print data will be printed.
• Damp data will not be printed.
On After printing of print data, the dump data will be printed.
Dump
• Only a dump data will be printed, but the “Number of Dot
in Data” will not be printed.
• Print data will not be printed.
Print Prints the last header dump.
If no history is available, “No Print Data” will appear on the
operation panel.
—
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu
To Next Page
Loading...
Need help?
General