MUTOH ValueJet VJ1324X User Manual

VJ-1324X OPERATION MANUAL Panel setup menu
5.1 Setup menu 157
5.1.5 Media Width menu
Specifies the media width between 7 mm away from the right edge of the platen and the left end if media
detection is not performed during media initialization.
(1) Media Width menu
Displays the detected media width if media detection is performed during media initialization.
(2) MediaWidth menu
NOTE
• If the media is loaded as shown in the illustration and media detection is not performed, the printing
may be performed between the right edge of the platen and the media.
5.1.8 Origin menu
(1) Media Width menu
NOTE
• Setting a larger value than the media width set in the Media Width menu may cause ink to leak on
the media or printer.
No. Name
1
Roll media
2
Media width (when not using media detection)
3
Media loading mark
4
Platen
Setup item Setting Description
Media Width 210mm to <1000mm> to
1371mm
Set the media width.
—
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1 User Type menu
1
22
3 4

MUTOH ValueJet VJ1324X Specifications

General

Brand	MUTOH
Model	ValueJet VJ1324X
Category	Printer
Language	English