Panel setup menu VJ-1324X OPERATION MANUAL
182 5.3 Cleaning menu
5.3 Cleaning menu
Performs head cleaning.
•Head cleaning can be operated when the printer is Normal.
Refer to the following for operation procedures.
6.2.3 Head cleaning
Setup item Description
Short Discharges smaller amount of ink compared to “Normal”.
Normal Select this mode normally.
Long Discharges larger amount of ink compare to “Normal”.
Used when the print head does not improve by normal Head cleaning.
Little Charge Discharges larger amount of ink compare to “Long”.
Charge a small amount of ink when printing is not stable after initial ink charge.
3.3 Installing ink cartridges
Initial Charge Perform this when using the high capacity pack adapter for the first time, for the printer whose
ink is charged.
3.3.3 When using the high capacity pack adapter for the printer whose ink
is charged for the first time
—
• [Enter] key:
“Cleaning **%” is displayed on the operation panel and Head cleaning starts.
Progress on the Head cleaning is displayed in % on the operation panel.
• [Cancel] key: shifts to the previous menu.
Panel setup menu
To Next Page
Loading...
Need help?
General