MUTOH ValueJet VJ1324X - 5.1.4 Media Initial menu

Panel setup menu VJ-1324X OPERATION MANUAL
156 5.1 Setup menu
5.1.4 Media Initial menu
Sets whether to detect the media width and edge while initializing the media.
NOTE
• Set the media width that is set in the Media Width menu when setting “Off” in the Media detection
menu.
5.1.5 Media Width menu
• When the Media detection menu is set to “Off”, the media cannot be cut automatically.
Setup item Setting Description
Init. Off The media is not detected.
Top & Width Detect the media width and edge while initializing the media.
<Width> Detect the media width while initializing the media.
—
• [Enter] key: saves the setting and shifts to the previous
menu.
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1 Setup menu