VJ-1324X OPERATION MANUAL Panel setup menu
5.1 Setup menu 143
Standard Adjust Print Menu
Adjusts only the print mode in the user type setting which is currently set.
Custom Adjust Print Menu
Perform adjustment for all patterns (A to F).
All print modes will be adjusted.
Setup item Setting Description
Adj. Print1: Standard Confirm ptn. Print the test pattern for the alignment.
Check before adjusting.
3.6.1.1 Standard Confirmation Pattern
Rough pattern Perform this adjustment when the misalignment is large.
Print adjustment patterns and enter the set values.
3.6.1.2 Standard Rough Adjustment Pattern
Fine pattern Perform this adjustment when the misalignment is small.
Print adjustment patterns and enter the set values.
3.6.1.3 Standard Micro Adjustment Pattern
—
• [Cancel] key: cancels the setting and shifts to the previous
menu.
5.1.1.1.3 Adjust Print menu
Setup item Setting Description
Adj. Print2 : Custom Confirm ptn. The test patterns of A to F will be printed for Adjust print.
Check before adjusting.
3.6.2.1 Custom Confirmation Pattern
Rough Ptn. ALL Perform this when the degree of misalignment is large.
Print Adjust patterns A to F and enter the set values.
3.6.2.2 Custom Rough Adjustment Pattern
Rough Pattern A to F When the degree of misalign is big, print out an adjust pattern
selected from A to F and enter the value.
3.6.2.3.1 Fine Pattern ALL
Fine Ptn. ALL Perform this when the degree of misalignment is small.
Print Adjust patterns A to F and enter the set values.
3.6.2.3.2 Fine Pattern A to F
—
• [Cancel] key: shifts to the previous menu.
5.1.1.1.3 Adjust Print menu
To Next Page
Loading...
Need help?
General