Panel setup menu VJ-1324X OPERATION MANUAL
184 5.4 Menu Option menu
Strike Wait Off Sets up whether to display the Strike Wait menu.
<On>
Slant Check Off Sets up whether to display the Slant Check menu.
<On>
Auto Cleaning Off Sets up whether to display the Auto Cleaning menu.
<On>
Ink Status Off Sets up whether to display the Ink Status menu.
<On>
Roll Length Off Sets up whether to display the Roll Length menu.
<On>
Exhaust fan <Off> Exhaust fan menu is not displayed for this printer.
Longstore Off Sets up whether to display the Longstore menu.
<On>
CR Maintenance Off Sets up whether to display the CR Maint. menu.
<On>
Initialization Off Sets up whether to display the Initialization menu.
<On>
Life Times Off Sets up whether to display the Life Times menu.
<On>
IP Address Off Sets up whether to display the IP Address menu.
<On>
Subnet Mask Off Sets up whether to display the subnet mask.
<On>
Gateway Off Sets up whether to display the Gateway menu.
<On>
Header dump Off Specify whether to display the header dump menu.
<On>
Start Feed Off Sets up whether or not to display the Start Feed menu
<On>
Heater control Off Set whether or not to display the Heater control menu.
<On>
Alert Buzzer Off Set whether or not to display the Alert Buzzer menu.
<On>
Setup item Setting Description
To Next Page
Loading...
