VJ-1324X OPERATION MANUAL Maintenance
6.1 Replacing consumable components 195
(2) Type
Our genuine ink cartridges that are compatible with the printer are as follows.
• To use 1000ml ink bags, high capacity pack adapters (option) are required. For details on high
capacity pack adapters, contact your local MUTOH dealer.
• Use genuine ink cartridges for replacement.
This printer is designed to use genuine ink cartridges.
If you use an ink bag that is not a product of the original manufacturer,
• Printing might become blurred, or the end of the ink in the bag might not be detected correctly.
• Any problems caused by using an ink bag other than those recommended above will not be covered
by the warranty, and repair expenses will be paid by the customer.
(3) Replacing steps
Follow the procedure below to replace the ink cartridges and high capacity pack adapter.
• Before operation, make sure to read the Safety Data Sheet (SDS).
• When handling ink cartridges or ink bags, pay attention so that ink does not get into
your eyes or stick to your skin.
If ink gets into your eyes or sticks to your skin, immediately wash it off with water.
Failing to do so might cause irritation or light inflammation of eyes.
In case of any abnormality, consult a physician immediately.
• Do not disassemble ink cartridges or ink bags.
If disassembled, there is a possibility that ink might come into contact with eyes or
skin.
Description Model No.
Ink cartridge K (Black: 220 ml) VJ-MSINK3A-BK220
Ink cartridge C (Cyan: 220 ml) VJ-MSINK3A-CY220
Ink cartridge M (Magenta: 220 ml) VJ-MSINK3A-MA220
Ink cartridge Y (Yellow: 220 ml) VJ-MSINK3A-YE220
Ink cartridge K (Black: 1,000ml) VJ-MSINK3-BK1000
Ink cartridge C (Cyan: 1,000ml) VJ-MSINK3-CY1000
Ink cartridge M (Magenta: 1,000ml) VJ-MSINK3-MA1000
Ink cartridge Y (Yellow: 1,000ml) VJ-MSINK3-YE1000
To Next Page
Loading...
Need help?
General