VJ-1324X OPERATION MANUAL Before using
3.5 Test print 63
5. Press the [Enter] key on the operation panel.
• Start performing Test Print for the selected item.
Refer to the following for details on each of the print list items.
3.5.1 Nozzle check to 3.5.4 Palette print
6. Repeat step 4 to step 5 when performing test print for other items.
7. Press the [Cancel] key on the operation panel to exit from test print.
• The operation panel returns to Normal.
• The procedure for test printing is complete.
To Next Page
Loading...
