VJ-1324X OPERATION MANUAL Before using
3.6 Adjust Print 81
5. “Pattern *: 4” (* indicates a pattern name as shown below) is displayed on the operation panel.
• The pattern name (*) differs depending on the set print mode.
The print modes and their pattern names are as follows.
• Refer to the following for Print mode.
5.1.1.1.1 Print Mode menu
6. Press the [+] key or [–] key to enter the number that you selected in Step 4.
• When you press the [Cancel] key on Operation panel, the display returns to “Adj.3: Fine Pattern”.
PrintMode PatternName
Quality 1, 2 C
Quality 3, 4 B
Graphics 1, 2 E
Graphics 3, 4 D
Banner 1, 2 A
Banner 3, 4 A
To Next Page
Loading...
