MV Agusta F4 S - Page 106

- 90 -
Maintenance
B
- Press “OK” for less than three seconds; the displayed
setting will start flashing.
- By repeatedly pressing “OK” for less than three
seconds, the following settings can be displayed in
sequence:
•
“NORMAL”
• “SPORT”
- Press “OK” for more than three seconds; the new set-
ting will be confirmed. The displayed caption stops
flashing and after a few seconds the display returns to
“ENGINE BRAKE” mode.
- Engine response: Press “OK” for less than three
seconds until “ENGINE RESPONSE” appears.
- Press “SET” for less than three seconds. The display
shows the current setting for engine response.
B_Manutenzione_GB_Rev.3_B_Manutenzione_GB_Rev.3.qxp 23/05/13 14:36 Pagina 90