THROTTLE BODY POSITION
The sensor of the throttle position (1) is located in the
centre of the throttle body.
This sensor is a potentiometer with a resistance which
varies according to the opening angle of the accelera-
tor.
The sensor is supplied by the ECU at a stabilised vol-
tage of 5V and supplies an output voltage proportiona-
te to the throttle angle.
The basic injection time of the fuel (volume) is deter-
mined according to the output voltage of this sensor.
The voltage increases when the accelerator opening is
increased.
RESISTANCE TEST : A - C
FEED TEST : (~ 4,9 ± 1 volt)
- 10 -
Air intake injection system
D
1
A– – (pin 16)
B– + 5V (pin 14)
C– Signal (pin 30)
To Next Page
Loading...
