CLUTCH/FRONT BRAKE LEVER REMOVAL
(F4 S - F4 FT - F4 R - F4 MY13)
Remove the nut shown in the figure.
Unscrew the pin.
Remove the clutch lever.
Brakes
- 19 -
H
REPLACING THE FRONT BRAKE SWITCH (F4 RR)
To replace the front brake switch, operate by using a
flat head screwdriver as shown in the picture.
After having carried out the overhaul of the
front brake pump assembly, carefully wash
and bleed the front brake system as previ-
ously described in this chapter.
To remove the clutch switch, follow the
procedure used for the front brake switch.
NOTE
To Next Page
Loading...
