Cooling system
- 25 -
L
OIL RADIATOR ASSEMBLY
Before reassembly, check the integrity of the oil tubes
and replace if necessary.
Also check conditions of the oil tube union seal rings
and replace if necessary.
Grease O-rings with silicone grease.
Reassemble previously removed components in the
opposite order of disassembly.
The radiator group that has just been
assembled should be complete with all
parts as shown in the exploded view in
page 3 of this chapter.
Carry out a final check before proceeding
with successive operations.
For an eventual codification and definition
of the parts, consult the spare parts cata-
logue (Table G08).
NOTE
To Next Page