Maintenance
- 15 -
B
Maintenance
Complete the assembly of the motorcycle.
Check once again the level of the coolant inside the
expansion tank, which should be between the «MIN»
and «MAX» mark found on the expansion tank.
If the level is inferior to the «MIN» mark, top up the
coolant level by pouring new coolant into the filler hole.
ELECTRIC COOLING FANS
Check
g on pre-delivery and at the first 1000
kilometres and then every 6000 kilome-
tres.
To carry out the check on the functioning of the electric
cooling fans, switch on the engine and heat it up.
The electric cooling fans must enter in function when
the temperature on the temperature gauge of the
instrument panel shows that the system has reached
100°C. If the electric cooling fans do not switch on,
carry out the checks on the various components as
described in chapter L “Cooling system”.
Max. level
Min. level
To Next Page
Loading...
