MV Agusta F4 S - Page 119

Maintenance
- 103 -
B
Replacing the license plate light bulb
(F4 - F4 R - F4 RR MY13)
- Remove the license plate light support fixing nuts.
- Pull out the bulb holder and remove the license plate
light support from the license plate holder.
- Extract the burnt-out bulb from the bulb holder.
- Fit the new bulb.
- Replace the bulb holder on the license plate light sup-
port.
- Replace the license plate light support on the license
plate holder.
- Insert the license plate light support fixing nuts.
B_Manutenzione_GB_Rev.3_B_Manutenzione_GB_Rev.3.qxp 23/05/13 14:36 Pagina 103