- 28 -
Brakes
H
Connect a rubber tube to the bleed valve, empty the
system in an appropriate container by slackening the
bleed valve as shown in the figure
Tighten the bleed valve.
Fill the rear brake fluid reservoir until the fluid reaches
the maximum level.
Recommended brake fluid: AGIP Brake 4
Utilise exclusively the prescribed brake
fluid. Use only new brake fluid from sealed
containers. NEVER utilise old or used brake
fluid.
Carefully clean around the edge of the brake fluid tank
using a clean cloth.
Before closing the fluid reservoir, check the condition
of the components.
Carry out bleeding also on the front brakes (see the
paragraph in this chapter).
To Next Page
Loading...
