Maintenance
- 45 -
B
Insert the air filter, respecting the correct way of
assembly, as shown in the figure.
Reposition the cover and press the five fastening tabs
down until they click.
Make sure that the cover is fastened properly by awai-
ting the click of the five tabs.
Air filter disassembling
(F4 MY10-> MY12)
Unhook the two front clips (1) and remove the cover
(2).
Remove the filter (3).
Check the condition of the air filter. If it is necessary to
substitute it, proceed as follows:
Prepare a new air filter.
Check that the inside of the air filter compartment is
clean and free from foreign bodies.
3
1
2
To Next Page
Loading...
