- 50 -
Maintenance
B
Maintenance
Before completing the operation, clean and wash
accurately with alcohol the three components of the
fluid chamber cover and blow to dry them.
Clean the edge of the fluid chamber with a clean cloth.
Close the fluid chamber with the two relative screws.
Imperfect cleaning of these parts could
cause the discharge of small quantities of
brake fluid during riding. Brake fluid has
strong corrosive properties.
Check eventual leaks and blow-bys of brake and clutch
fluid on the unions and tubing.
If any breakages are seen, substitute the damaged
parts as described in chapter H “Brakes”.
Brake fluid leakages are dangerous and
immediately discolour painted surfaces.
Before riding, check the tubes and joints of
the brakes for damage and signs of leaks.
To Next Page
Loading...
