- 68 -
Maintenance
B
Maintenance
Selecting and setting the display functions
Some of the main measurements of the instruments
may be changed.
The available options include:
- Select an operating mode:
“RUN” (Odometer)
“TC” (Traction control)
“CHRONO” (Chronometer)
“NIGHT/DAY” (Night/Day Mode)
“SETTING ÖHLINS” (Electronic suspension
adjustment) (F4 RR MY13)
“ABS” (Antilock braking system)* (MY13)
“QUICK SHIFT” (MY13)
- Reset the trip counter:
Trip counter 1 “TRIP 1”
Trip counter 2 “TRIP 2”
- Turn on the chronometer
- "IMMOBILIZER" function (Anti-theft system)
- Control unit mapping selection
Selecting the display functions
The following settings may be changed on the display:
•
“RUN”
(Odometer)
• “TC” (Traction control)
• “CHRONO” (Chronometer)
• “NIGHT/DAY” (Night/Day Mode)
• “SETTING ÖHLINS” (Electronic suspension
adjustment) (F4 RR MY13)
• “ABS” (Antilock braking system)* (MY13)
• “QUICK SHIFT” (MY13)
To display the operating modes, press “SET” for less
than four seconds. When pressed, the display shows
all modes, in a sequence. Select the desired mode.
WARNING
The operation must be performed while the
engine off, the gears are in neutral, the
motorcycle is stationary, and with the feet
on the ground. Do not set the display func-
tions while riding.
(*): This function is present only on certain models
To Next Page
Loading...
