Maintenance
- 71 -
B
Maintenance
Trip reset
To reset “TRIP 1” and “TRIP 2”, proceed as follows.
WARNING
The display modes may be changed or set
when the engine off, the gear in neutral, the
motorbike stationary with your feet on the
ground. The display may not be changed
while driving.
- Access the “RUN” mode; the total speedometer
("TOTAL”) and partial speedometer 1 (“TRIP 1”) will
appear on the display.
- By pressing the “OK” key for more than three
seconds, the “TRIP 1” value will be reset to zero.
“QUICK SHIFT” Mode (MY13)
This mode allows to turn off or on the “quick shift” func-
tion of the gear change.
To Next Page
Loading...
