NEC Storage Manager - iSM07155: State of PD(<aa>h) has become attn(powering up). (<bbb...b> productID=<ccc...c> SN=<ddd...d> No=<ee>h-<ff>h <ggg...g>)

Chapter 2 Message List
120
iSM07155: State of PD(<aa>h) has become
attn(powering up).
(<bbb...b> productID=<ccc...c>
SN=<ddd...d> No=<ee>h-<ff>h
<ggg...g>)
[Classification] NOTICE
[Explanation] It indicates that the physical disk (number: ee-ff) of disk array (name: bbb...b) is
activated.
aa : Internal number indicating physical disk type
bbb...b : Disk array name
ccc...c : Product ID of disk array (S2800 Disk Array etc.)
ddd...d : Serial number of disk array
ee-ff : Physical disk number
ggg...g : Information of RANK or pool where the physical disk belongs
- PoolNo=<xxxx>h PoolName=<yyy...y>
Indicates pool information. (for the disk arrays with pool)
xxxx : Pool number
yyy...y : Pool name
- RankNo=<xx>h-<yy>h
Indicates RANK information. (for other than the disk arrays
with pool)
xx-yy : RANK number
[Measures] Unnecessary (It usually becomes ready within a few seconds. If the status does
not become ready, perform the appropriate maintenance because some trouble
may occur).