NEC Storage Manager - iSM03133: Management of control path in diskarray[<a>] failed. ip=<bbb...b> port=<ccccc> reason=(invalid receive data) detail=<dd-eeee>; iSM03134: Management of control path in diskarray[<a>] failed. ip=<bbb...b> port=<ccccc> command=(<ddd...d>) status=(<ee>;<ff>;<gg>;<hh>) detail=<ii-jjjj>

Chapter 2 Message List
42
iSM03133: Management of control path in
diskarray[<a>] failed. ip=<bbb...b>
port=<ccccc> reason=(invalid receive
data) detail=<dd-eeee>
[Classification] NOTICE
[Explanation] Failed in the inclusion of the control path.
a : Disk array specifying number in environment definition file
(UNIX system: 1 to 64, Windows system: 1 to 32)
bbb...b : IP address
ccccc : Port number
dd-eeee : Detail information (This code is not disorder reason but a value
for maintenance.)
[Measures] Check the disk array state, and remove the failure.
iSM03134: Management of control path in
diskarray[<a>] failed. ip=<bbb...b>
port=<ccccc> command=(<ddd...d>)
status=(<ee>/<ff>/<gg>/<hh>)
detail=<ii-jjjj>
[Classification] NOTICE
[Explanation] Failed in the inclusion of the control path.
a : Disk array specifying number in environment definition file
(UNIX system: 1 to 64, Windows system: 1 to 32)
bbb...b : IP address
ccccc : Port number
ddd...d : Command Descriptor Block of the issued command
ee : Status Byte
ff : Sense Key
gg : Additional Sense Code
hh : Additional Sense Code Qualifier
ii-jjjj : Detail information (This code is not disorder reason but a value
for maintenance.)
[Measures] Check the disk array state, and remove the failure.