NEC Storage Manager - iSM10314: Logical Disks were paired: mv=<aaa...a>(<bbbb>h) <ccc...c>, rv=<aaa...a>(<bbbb>h) <ccc...c> [, several states changed.]; iSM10315: Logical Disks were unpaired: mv=<aaa...a>(<bbbb>h) <ccc...c>, rv=<aaa...a>(<bbbb>h) <ccc...c> [, several states changed.]

Chapter 2 Message List
227
iSM10314: Logical Disks were paired:
mv=<aaa...a>(<bbbb>h) <ccc...c> ,
rv=<aaa...a>(<bbbb>h) <ccc...c>
[, several states changed.]
[Classification] NOTICE
[Explanation] It indicates that paired volumes were detected.
If two or more state transitions occurred within a polling interval and the midway
states could not be identified, “several states changed” is output to indicate that
multiple state transitions occurred.
aaa...a : Logical disk name
bbbb : Logical disk number
ccc...c : Disk array name
[Measures] Unnecessary
iSM10315: Logical Disks were unpaired:
mv=<aaa...a>(<bbbb>h) <ccc...c> ,
rv=<aaa...a>(<bbbb>h) <ccc...c>
[, several states changed.]
[Classification] NOTICE
[Explanation] It indicates that unpairing of paired volumes was detected.
If two or more state transitions occurred within a polling interval and the midway
states could not be identified, “several states changed” is output to indicate that
multiple state transitions occurred.
aaa...a : Logical disk name
bbbb : Logical disk number
ccc...c : Disk array name
[Measures] Unnecessary