NEC Storage Manager - iSM07342: Changing ACCESS_CONTROL mode was failed. (<aaa...a> No=<bb>h-<cc>h); iSM07343: Starting ACCESS_CONTROL function was failed. (<aaa...a>); iSM07344: Stopping ACCESS_CONTROL function was failed. (<aaa...a>)

Chapter 2 Message List
156
iSM07342: Changing ACCESS_CONTROL mode
was failed. (<aaa...a>
No=<bb>h-<cc>h)
[Classification] INFO
[Explanation] It indicates that changing Port (number: bb-cc) of disk array (name: aaa...a)
failed.
aaa...a : Disk array name
bb-cc : Port number
[Measures] Identify a cause of fault on the basis of previous and following messages, remove
the cause of fault, and then retry processing.
iSM07343: Starting ACCESS_CONTROL function
was failed. (<aaa...a>)
[Classification] INFO
[Explanation] It indicates that starting Access Control function of disk array (name: aaa...a)
failed.
aaa...a : Disk array name
[Measures] Identify a cause of fault on the basis of previous and following messages, remove
the cause of fault, and then retry processing.
iSM07344: Stopping ACCESS_CONTROL
function was failed. (<aaa...a>)
[Classification] INFO
[Explanation] It indicates that stopping Access Control function of disk array (name: aaa...a)
failed.
aaa...a : Disk array name
[Measures] Identify a cause of fault on the basis of previous and following messages, remove
the cause of fault, and then retry processing.