NEC Storage Manager - iSM13651: Target pair is already registered in other ATgroup. MV=<aaa...a> RV=<aaa...a> (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>); iSM13651: Target pair is already registered in specified ATgroup. MV=<aaa...a> RV=<aaa...a> (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>); iSM13652: Target pair is not registered in specified ATgroup. MV=<aaa...a> RV=<aaa...a> (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>)

Chapter 2 Message List
409
iSM13651: Target pair is already registered in
other ATgroup. MV=<aaa...a>
RV=<aaa...a>
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
iSM13651: Target pair is already registered in
specified ATgroup. MV=<aaa...a>
RV=<aaa...a>
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
[Classification] ERROR
[Explanation] The specified pair is already registered in another AT-group. A pair cannot be
registered in multiple AT-groups at the same time.
aaa...a : Volume name
bbb...b : Process number
ccc...c : Detailed information (This code is not disorder reason but a
value for maintenance.)
[Measures] Check the specified volume, and then retry processing.
Or, unpair the target from the AT-group, and re-execute the command.
iSM13652: Target pair is not registered in
specified ATgroup. MV=<aaa...a>
RV=<aaa...a>
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
[Classification] ERROR
[Explanation] The specified pair is not registered in the AT-group.
aaa...a : Volume name
bbb...b : Process number
ccc...c : Detailed information (This code is not disorder reason but a
value for maintenance.)
[Measures] Check the specified AT-group or volume, and retry processing.