NEC Storage Manager - iSM10312: command: <aaa...a>, mv=<bbb...b> (<cccc>h) <ddd...d>, rv=<bbb...b> (<cccc>h) <ddd...d>; iSM10313: Replication state of diskarray was changed: <aaa...a>, Replication Subsystem State = <bbb...b>, Back Ground Copy Level = <c> [, several states changed.]

Chapter 2 Message List
226
iSM10312: command: <aaa...a>, mv=<bbb...b>
(<cccc>h) <ddd...d>, rv=<bbb...b>
(<cccc>h) <ddd...d>
[Classification] NOTICE
[Explanation] It indicates that setting operation to the pair expressed in MV or RV has been
executed.
aaa...a : Command name
bbb...b : Logical disk name
cccc : Logical disk number
ddd...d : Disk array name
As for command name, refer to the “Data Replication User’s Manual (Function
Guide)”.
[Measures] Unnecessary
iSM10313: Replication state of diskarray was
changed: <aaa...a>, Replication
Subsystem State = <bbb...b>, Back
Ground Copy Level = <c>
[, several states changed.]
[Classification] NOTICE
[Explanation] It indicates that the state change of disk array replication (freeze/defreeze) was
detected.
If two or more state transitions occurred within a polling interval and the midway
states could not be identified, “several states changed” is output to indicate that
multiple state transitions occurred.
aaa...a : Disk array name
bbb...b : Disk array state
freeze : Freeze
defreeze : Defreeze
c : Background copy level (1, 2, 3 , 4, 5)
1,2,3,4,5: Background copy level
[Measures] Unnecessary