NEC Storage Manager - iSM03221: Control path access failed. file=<aaa...a> command=(<bbb...b>) status=(<cc>;<dd>;<ee>;<ff>) detail=<gg-hhhh>; iSM03221: Control path access failed. Disk=(disk<aaa> (Port<bbb> Bus<ccc> Target<ddd> Lun<eee>)) command=(<fff...f>) status=(<gg>;<hh>;<ii>;<jj>) detail=<kk-llll>

Chapter 2 Message List
52
iSM03221: Control path access failed.
file=<aaa...a> command=(<bbb...b>)
status=(<cc>/<dd>/<ee>/<ff>)
detail=<gg-hhhh>
[Classification] ERROR
[Explanation] A command error occurred. A failure may exist in the disk array.
This message is output on UNIX system.
aaa...a : Special file name
bbb...b : Command Descriptor Block of the issued command
cc : Status Byte
dd : Sense Key
ee : Additional Sense Code
ff : Additional Sense Code Qualifier
gg-hhhh : Detail information (This code is not disorder reason but a value
for maintenance.)
[Measures] Check the state of the disk array, and remove the failure.
iSM03221: Control path access failed.
Disk=(disk<aaa> (Port<bbb>
Bus<ccc> Target<ddd> Lun<eee>))
command=(<fff...f>)
status=(<gg>/<hh>/<ii>/<jj>)
detail=<kk-llll>
[Classification] ERROR
[Explanation] A command error occurred. A failure may exist in the disk array.
This message is output on Windows system.
diskaaa (Portbbb Busccc Targetddd Luneee): Disk information
fff...f : Command Descriptor Block of the issued command
gg : Status Byte
hh : Sense Key
ii : Additional Sense Code
jj : Additional Sense Code Qualifier
kk-llll : Detail information (This code is not disorder reason but a value
for maintenance.)
[Measures] Check the state of the disk array, and remove the failure.