NEC Storage Manager - iSM13571: Target ATgroup is separating now. ATG=<aaa...a> (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>); iSM13571: Target pair is separating now. (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>); iSM13572: Target ATgroup is not suspended. ATG=<aaa...a> (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>)

Chapter 2 Message List
376
iSM13571: Target ATgroup is separating now.
ATG=<aaa...a>
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
iSM13571: Target pair is separating now.
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
[Classification] ERROR
[Explanation] The specified pair is being separated. Or the specified AT-group is in the
separate start (Sep/start) or separate execution (Sep/exec) state.
aaa...a : AT-group name
bbb...b : Process number
ccc...c : Detailed information (This code is not disorder reason but a
value for maintenance.)
[Measures] Retry processing after the separated state is established.
iSM13572: Target ATgroup is not suspended.
ATG=<aaa...a>
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
[Classification] ERROR
[Explanation] The sync state of the specified AT-group is not replicate suspend (Rpl/suspend)
or restore suspend (Rst/suspend).
aaa...a : AT-group name
bbb...b : Process number
ccc...c : Detailed information (This code is not disorder reason but a
value for maintenance.)
[Measures] Check the state of the AT-group, and retry replicate or restore if necessary.