NEC Storage Manager - iSM14432: Start data initialize: LDN=<aaaa>h, <aaaa>h..., status=<bbb...b>; iSM14433: Stop data initialize: LDN=<aaaa>h, <aaaa>h..., status=<bbb...b>

Chapter 2 Message List
496
iSM14432: Start data initialize : LDN=<aaaa>h,
<aaaa>h..., status=<bbb...b>
[Classification] INFO
[Explanation] It indicates that initialization of the logical disk began.
aaaa : Logical disk number
bbb...b : Execution state of the command.
good : Normal
failed(xxxx) : Error occurred (xxxx is error description)
[Measures] When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.
iSM14433: Stop data initialize : LDN=<aaaa>h,
<aaaa>h..., status=<bbb...b>
[Classification] INFO
[Explanation] It indicates that initialization of the logical disk was suspended.
aaaa : Logical disk number
bbb...b : Execution state of the command.
good : Normal
failed(xxxx) : Error occurred (xxxx is error description)
[Measures] When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.