NEC Storage Manager - iSM07211: Renaming Disk Array,named “<aaa...a>”,is failed. (SN=<bbbbb>); iSM07212: Renaming PORT of “<aaa...a>” is failed. (No=<bb>h-<cc>h); iSM07213: Renaming LD of “<aaa...a>” is failed. (No=<bbbb>h)

Chapter 2 Message List
142
iSM07211: Renaming Disk Array,named
“<aaa...a>”,is failed. (SN=<bbbbb>)
[Classification] INFO
[Explanation] It indicates that change of disk array names (name: aaa...a, serial number: bbbbb)
failed.
aaa...a : Disk array name
bbbbb : Serial number
[Measures] Check result indicated on client screen (dialog) and remove cause of the failure.
Then change the names again.
iSM07212: Renaming PORT of “<aaa...a>” is
failed. (No=<bb>h-<cc>h)
[Classification] INFO
[Explanation] It indicates that change of port name (number: bb-cc) of disk array (name:
aaa...a) failed.
aaa...a : Disk array name
bb-cc : Port number
[Measures] Check result indicated on client screen (dialog) and remove cause of the failure.
Then change the names again.
iSM07213: Renaming LD of “<aaa...a>” is failed.
(No=<bbbb>h)
[Classification] INFO
[Explanation] It indicates that change of logical disk (number: bbbb) of disk array (name:
aaa...a) failed.
aaa...a : Disk array name
bbbb : Logical disk number
[Measures] Check result indicated on client screen (dialog) and remove cause of the failure.
Then change the names again.