NEC Storage Manager - iSM10302: command: <aaa...a>, <bbb...b>, status=failed (<cc>h;<dd>h;<ee>h); iSM10303: command: <aaa...a>, volume= <bbbb>h <ccc...c>, status=failed (<dd>h;<ee>h;<ff>h)

Chapter 2 Message List
221
iSM10302: command: <aaa...a>, <bbb...b>,
status=failed (<cc>h/<dd>h/<ee>h)
[Classification] INFO
[Explanation] It indicates that it failed in accessing the disk array (failure of SCSI protocol).
aaa...a : Command name
bbb...b : Disk array name
cc : Sense Key defined in SCSI specification
dd : Additional Sense Code defined in SCSI specification
ee : Additional Sense Code Qualifier defined in SCSI specification
[Measures] Check whether the configuration of disk array has been changed.
iSM10303: command: <aaa...a>, volume=
<bbbb>h <ccc...c>, status=failed
(<dd>h/<ee>h/<ff>h)
[Classification] INFO
[Explanation] It indicates that it failed in accessing the volume expressed in logical disk
number (failure of SCSI protocol).
aaa...a : Command name
bbbb : Logical disk number
ccc...c : Disk array name
dd : Sense Key defined in SCSI specification
ee : Additional Sense Code defined in SCSI specification
ff : Additional Sense Code Qualifier defined in SCSI specification
[Measures] Check whether the configuration of disk array has been changed.