NEC Storage Manager - iSM10304: command: <aaa...a>, <bbb...b>=<ccc...c> (<dddd>h) <eee...e>, status=failed (<ff>h;<gg>h;<hh>h); iSM10305: command: <aaa...a>, <bbb...b>, status=failed (ec=<ccc...c>)

Chapter 2 Message List
222
iSM10304: command: <aaa...a>,
<bbb...b>=<ccc...c> (<dddd>h)
<eee...e>, status=failed
(<ff>h/<gg>h/<hh>h)
[Classification] INFO
[Explanation] It indicates that it failed in accessing the volume expressed in logical disk name
(failure of SCSI protocol).
aaa...a : Command name
bbb...b : Volume classification
ccc...c : Logical disk name
dddd : Logical disk number
eee...e : Disk array name
ff : Sense Key defined in SCSI specification
gg : Additional Sense Code defined in SCSI specification
hh : Additional Sense Code Qualifier defined in SCSI specification
[Measures] Check whether the configuration of disk array has been changed.
iSM10305: command: <aaa...a>, <bbb...b>,
status=failed (ec=<ccc...c>)
[Classification] INFO
[Explanation] It indicates that it failed in accessing the disk array (failure except for SCSI
protocol).
aaa...a : Command name
bbb...b : Disk array name
ccc...c : Error code
[Measures] Check whether the configuration of disk array has been changed.