Chapter 2 Message List
492
iSM14424: Set SPARE mode : mode=<aaa>,
status=<bbb...b>
[Classification] INFO
[Explanation] It indicates that ON/OFF of data rewrite at failure recovery was set.
aaa : on, off
bbb...b : Execution state of the command.
good : Normal
failed(xxxx) : Error occurred (xxxx is error description)
[Measures] When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.
iSM14425: Set write cache mode(maintenance) :
<aaa>mode=<bbb>, status=<ccc...c>
[Classification] INFO
[Explanation] It indicates that ON/OFF of write cache mode was set.
aaa : BBU or CNT
bbb : on, off
ccc...c : Execution state of the command.
good : Normal
failed(xxxx) : Error occurred (xxxx is error description)
[Measures] When an error occurs (status=failed was output), the configuration or setting of
the disk array may be changed. After updating it to the newest information or
restarting state monitoring, check current state and execute again.
To Next Page
Loading...
