NEC Storage Manager - iSM13403: Specified attribute (<aaa...a>) was already set up to the ATgroup. ATG=<bbb...b> (code=<ccc...c>-<ddd...d>-<ddd...d>-<ddd...d>); iSM13405: Specified targets are duplicated. device name MV=<aaa...a>, device name RV=<aaa...a>

Chapter 2 Message List
340
iSM13403: Specified attribute (<aaa...a>) was
already set up to the ATgroup.
ATG=<bbb...b>
(code=<ccc...c>-<ddd...d>-<ddd...d>-<
ddd...d>)
[Classification] WARNING
[Explanation] Specified attribute has already been set up to the AT-group.
aaa...a : Specified attribute value
bbb…b : AT-group name
ccc...c : Process number
ddd...d : Detailed information (This code is not disorder reason but a
value for maintenance.)
[Measures] Confirm the condition for executing the specified command, and then re-execute
the command.
iSM13405: Specified targets are duplicated.
device name MV=<aaa...a>, device
name RV=<aaa...a>
[Classification] WARNING
[Explanation] Specified pair information is defined repeatedly. When iSMrc_sense is
executed, the volume defined on the MV side is repeated.
aaa...a : Volume name
[Measures] Check the volume specification.