NEC Storage Manager - iSM13590: Specified ATgroup cannot be operated from this site. ATG=<aaa...a> (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>); iSM13591: Volume list error.

Chapter 2 Message List
385
iSM13590: Specified ATgroup cannot be
operated from this site.
ATG=<aaa...a>
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
[Classification] ERROR
[Explanation] Operation of the specified AT-group cannot be executed from the current
position.
AT-group binding is enabled on the concentrator side.
aaa...a : AT-group name
bbb...b : Process number
ccc...c : Detailed information (This code is not disorder reason but a
value for maintenance.)
[Measures] Check the operation position, and re-execute the command from the position
where the operation is possible.
iSM13591: Volume list error.
[Classification] ERROR
[Explanation] The volume list table is invalid.
Or, a volume list created by the iSMvollist command of a version that is older
than Ver1.4 cannot be used for operation of AT-groups.
[Measures] Create a new volume list table.