NEC Storage Manager - iSM07452: State of PD(<aa>h) has become info(inactive). (<bbb...b> productID=<ccc...c> SN=<ddd...d> No=<ee>h-<ff>h <ggg...g>) [UC=<hhh...h> FC=<ii>][_ALERT_]

Chapter 2 Message List
164
iSM07452: State of PD(<aa>h) has become
info(inactive). (<bbb...b>
productID=<ccc...c> SN=<ddd...d>
No=<ee>h-<ff>h <ggg...g>)
[UC=<hhh...h> FC=<ii>][_ALERT_]
[Classification] INFO
[Explanation] It indicates that trouble occurred in the physical disk (number: ee-ff) of disk
array (name: bbb...b).
For Windows, this message is target of ESMPRO Manager Report, and also to
be target of ALIVE/Express Report via ESMPRO.
aa : Internal number indicating physical disk type
bbb...b : Disk array name
ccc...c : Product ID of disk array (S2800 Disk Array etc.)
ddd...d : Serial number of disk array
ee-ff : Physical disk number
ggg...g : Information of RANK or pool where the physical disk belongs
- PoolNo=<xxxx>h PoolName=<yyy...y>
Indicates pool information. (for the disk arrays with pool)
xxxx : Pool number
yyy...y : Pool name
- RankNo=<xx>h-<yy>h
Indicates RANK information. (for other than the disk arrays
with pool)
xx-yy : RANK number
hhh...h/ii : Maintenance information
[Measures] Check the status of resource with the trouble and perform the appropriate
maintenance.