NEC Storage Manager - iSM13580: Target ATgroup is suspended now. ATG=<aaa...a> (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>); iSM13581: These targets have replicated. (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>); iSM13581: These targets have replicated. ATG=<aaa...a> (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>)

Chapter 2 Message List
380
iSM13580: Target ATgroup is suspended now.
ATG=<aaa...a>
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
[Classification] ERROR
[Explanation] The sync state of the specified AT-group has become replicate suspend
(Rpl/suspend) or restore suspend (Rst/suspend).
aaa...a : AT-group name
bbb...b : Process number
ccc...c : Detailed information (This code is not disorder reason but a
value for maintenance.)
[Measures] Check the state of the AT-group, and resume replicate or restore.
iSM13581: These targets have replicated.
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
iSM13581: These targets have replicated.
ATG=<aaa...a>
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
[Classification] ERROR
[Explanation] A command not allowed for replicated volume or AT-group was executed.
aaa...a : AT-group name
bbb...b : Process number
ccc...c : Detailed information (This code is not disorder reason but a
value for maintenance.)
[Measures] Check executing condition of the command and retry command execution.