NEC Storage Manager - iSM13482: Target ATgroup is separating now. ATG=<aaa...a> (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>); iSM13483: Target ATgroup is fault. ATG=<aaa...a> (code=<bbb...b>-<ccc...c>-<ccc...c>-<ccc...c>)

Chapter 2 Message List
347
iSM13482: Target ATgroup is separating now.
ATG=<aaa...a>
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
[Classification] WARNING
[Explanation] The specified AT-group is in the state of separate start (Sep/start) or separate
execution (Sep/exec), separation has been already started.
aaa...a : AT-group name
bbb...b : Process number
ccc...c : Detailed information (This code is not disorder reason but a
value for maintenance.)
[Measures] Confirm the condition for executing the specified command, and then re-execute
the command.
iSM13483: Target ATgroup is fault.
ATG=<aaa...a>
(code=<bbb...b>-<ccc...c>-<ccc...c>-<
ccc...c>)
[Classification] WARNING
[Explanation] The specified AT-group is in the state of failure separation (Fault), and
synchronization has already stopped.
aaa...a : AT-group name
bbb...b : Process number
ccc...c : Detailed information (This code is not disorder reason but a
value for maintenance.)
[Measures] Confirm the condition for executing the specified command, and then re-execute
the command.