Chapter 2 Message List
206
iSM09012: Request of change LD movement
speed from <aaaa>(<bbb...b>) to
<cccc>(<ddd...d>) in <eee...e> is
rejected detcode=<ffffffff>
[Classification] NOTICE
[Explanation] It indicates that the request to change the logical disk movement speed was
rejected.
aaaa : Logical disk number of moved material logical disk
bbb...b : Logical disk name of moved material logical disk
cccc : Logical disk number of work disk for Optimization
ddd...d : Logical disk name of work disk for Optimization
eee...e : Disk array name
ffffffff : Detail code
[Measures] Take the measures below.
y Check the specification of the logical disk for which the movement speed is
changed.
y Check for the disk array status according to the related messages, eliminate
the error cause (e.g., error recovery), and then re-execute the command.
iSM09013: To get subsystem information failed
from disk array=<aaa...a>
detcode=<bbbbbbbb>
[Classification] NOTICE
[Explanation] It indicates that the attempt to obtain such information related to the disk array as
configuration and attribution failed.
aaa...a : Disk array name
bbbbbbbb : Detail code
[Measures] Find the cause of the error on the disk array based on the information shown in
other messages, remove the cause and resume monitoring.
To Next Page
Loading...
