Troubleshooting
69
The Transfer Film could not be detected correctly.
Reload the Transfer Film.
→See "Changing the Ink Ribbon and Transfer Film" on page 16 for details about
changing the Transfer Film.
The Transfer Film set in the printer and printer settings may be
different.
→See "Ink Ribbon/Transfer Film" on page 81 about the supported types of
Transfer Film.
→See "Setting the Type of Ink Ribbon or Transfer Film to Use" on page 39 for
details on how to set the Transfer Film type.
Transfer Film not supported by this printer cannot be used.
→See "Ink Ribbon/Transfer Film" on page 81 for types of supported Transfer
Film.
The Transfer Film could not be wound up.
Reload the Transfer Film.
→See "Changing the Ink Ribbon and Transfer Film" on page 16 for details about
changing the Transfer Film.
The Transfer Film may be cut.
Repair the cut Transfer Film.
→See "If the Ink Ribbon or Transfer Film are Cut" on page 76 for instructions on
how to repair a cut Transfer Film.
The Transfer Film set in the printer and printer settings may be
different.
→See "Ink Ribbon/Transfer Film" on page 81 about the supported types of
Transfer Film.
→See "Setting the Type of Ink Ribbon or Transfer Film to Use" on page 39 for
details on how to set the Transfer Film type.
Both the Ink Ribbon and Transfer Film have been used up.
Replace both the Ink Ribbon and the Transfer Film.
→See "Changing the Ink Ribbon and Transfer Film" on page 16 for details about
changing the Ink Ribbon and Transfer Film.
To Next Page
Loading...
Need help?
General
