7705 SAR Interfaces
184
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.7 Configuration Notes
The following information describes provisioning guidelines and caveats.
• The IOM can only be designated slot 1 of the chassis.
• An IOM must be preprovisioned to accept specific adapter card types; the card
type is always iom-sar.
If an adapter card type is installed in a slot provisioned for a different type, the
card will not initialize.
• An adapter card installed in an unprovisioned slot remains administratively and
operationally down until the IOM software is activated and the MDA slot and type
is specified.
• Ports cannot be provisioned until the IOM software is activated and the MDA
type is specified.
3.7.1 Reference Sources
For information on supported IETF drafts and standards as well as standard and
proprietary MIBs, refer to Standards and Protocol Support.
To Next Page
Loading...
