Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 245
3.11.2.8 Configuring TDM PPP
Use the following CLI syntax to configure PPP parameters for TDM DS3/E3 ports.
CLI Syntax: port port-id
tdm
ds3
encap-type ppp-auto
mode network
ppp
keepalive time-interval [dropcount
drop-count]
no keepalive
e3
encap-type ppp-auto
mode network
ppp
keepalive time-interval [dropcount
drop-count]
no keepalive
3.11.2.9 Configuring Channelized Ports
Channelized ports are supported on the following cards and module:
• 16-port T1/E1 ASAP Adapter card
• 32-port T1/E1 ASAP Adapter card
• 12-port Serial Data Interface card
• 6-port E&M Adapter card
• 2-port OC3/STM1 Channelized Adapter card
• 4-port OC3/STM1 / 1-port OC12/STM4 Adapter card
• 4-port DS3/E3 Adapter card
• 8-port Voice & Teleprotection card
• 4-port T1/E1 and RS-232 Combination module
• 8-port FXO Adapter card
• 6-port FXS Adapter card
Note: Ethernet ports cannot be channelized.
To Next Page
Loading...
