Nokia 7705 SAR - 3.13.1.24 LAG Commands

7705 SAR Interfaces
306
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
— idle-code abcd-code
—no idle-code
— loopback {internal-analog | internal-digital}
—no loopback
— seized-code abcd-code
— signaling-lead
— e {high | low | end-to-end}
— m {high | low | end-to-end}
— signaling-mode {em | transmission-only}
— [no] shutdown
— [no] fxo
— [no] channel-group channel-group-id
— description description-string
—no description
— encap-type cem
—no encap-type
— mode access
— [no] shutdown
— fault-signaling {idle | seized}
—
loopback internal-digital
—no loopback
— [no] shutdown
— [no] fxs
— [no] channel-group channel-group-id
— description description-string
—no description
— encap-type cem
—no encap-type
— mode access
— [no] shutdown
— fault-signaling {idle | seized}
— loopback internal-digital
—no loopback
— [no] shutdown
— line-balance {nominal | 800}
— ring-generation {16 | 20 | 25}
—no ring-generation
— signaling-type {3600plar | 1511plar | 3600ls | 1511profile1 | 3600re}
— tlp-rx
decibels
— tlp-tx decibels
3.13.1.24 LAG Commands
config
— [no] lag [lag-id]
— access
— adapt-qos {link | distribute}
— description description-string
—no description
— [no] dynamic-cost
— encap-type {dot1q | null | qinq}