Interface Configuration Guide 7705 SAR Interfaces
Edition: 01 3HE 11011 AAAC TQZZA 499
3.13.2.28 Voice Channel Group Commands
channel-group
Syntax [no] channel-group channel-group-id
Context config>port>voice>em
config>port>voice>fxo
config>port>voice>fxs
Description This command creates a DS0 channel group for a channelized E&M, FXO, or FXS voice
interface.
Channel groups cannot be further subdivided.
The no form of this command deletes the specified channel group.
Default n/a
Parameters channel-group-id — specifies the channel group ID number
Values 1 (only a single DS0 channel group, the first one, can be configured)
encap-type
Syntax encap-type cem
Context config>port>voice>em>channel-group
config>port>voice>fxo>channel-group
config>port>voice>fxs>channel-group
Description This command configures the encapsulation method used by the channel group.
Default no encap-type
Parameters cem — specifies the encapsulation method as circuit emulation (TDM)
To Next Page
Loading...
