7705 SAR Interfaces
66
Interface Configuration Guide
3HE 11011 AAAC TQZZA Edition: 01
3.1.4 Configuring SCADA Bridges
Surveillance, Control, and Data Acquisition (SCADA) bridges are configured on an
Integrated Services card as part of the multidrop data bridge (MDDB), pulse code
modulation (PCM) multidrop bridge, and voice conference bridge (VCB) functionality.
MDDB, PCM, and VCB are used to support SCADA systems on a 7705 SAR-8 or
7705 SAR-18.
For information on MDDB, see Multidrop Data Bridge. For information on PCM
multidrop bridge, see PCM Multidrop Bridge. For information on VCB, see Voice
Conference Bridge.
A SCADA bridge can be configured after the IOM is activated (the card slot and card
type are designated) and the adapter card slot is preprovisioned with the Integrated
Services card mda-type.
To Next Page
Loading...
